Follow us on Facebook Follow us on Twitter Watch us on YouTube
Register
Results 1 to 16 of 16
  1. #1

    Rokmen HiLine Fenders

    There were some posts in the shoot the shit forum about this install, but I'll post start to finish pictures here...

    Drove up to Dr. Dirty's shop early to get the party started



    Rip off the old fenders & mock up the new ones





    Start welding..



    Bend down the flare that comes as one piece





    Little finish welding on the floor



    Little Grinding



    Time to get rid of the unnecessary hood..

    2004 TJ

    http://i1238.photobucket.com/albums/...pse0aba888.gif

    Quote Originally Posted by Dan View Post
    Dr. Dirty just won the Internet singehanded.

  2. #2
    Making a little more room near the front of the hood



    Yea, that coozie is bad ass, I had to test it out of course..



    Last fitment





    Had to modify the PSC rockers to fit with new fenders



    Strapped the hood down and drove back to southern So-Cal





    Paint on the fenders and rockers



    Missing something?


  3. #3
    Fenders/Rockers installed again





    Completed, including the hood pins










  4. #4
    I forgot to get a pic of under the hood with all the shit relocated, I'll edit that into this post soon!

  5. #5
    Who is your daddy? dr.dirty's Avatar
    Date Committed
    Nov 2011
    Location
    SoCal
    Posts
    4,553
    They turned out sweet painted and with the hood pins. I know that was alot of fun getting them off for paint LOL

  6. #6
    Powered By power bottoms jkristie44's Avatar
    Date Committed
    Nov 2011
    Location
    Pensacola naval base checking out the mens in uniform
    Posts
    4,546
    Makes me want to buy a TJ!

    NIce work.

  7. #7
    Bat Shit Crazy Obstruction of Justice's Avatar
    Date Committed
    Nov 2011
    Location
    High Dezert CA
    Posts
    1,308
    Looks freakin badass! Lookin forward to the flex pics.

  8. #8
    Resident Askhole BenDrinken's Avatar
    Date Committed
    Nov 2011
    Location
    Kent, Washington
    Posts
    1,271
    Very nicely done. Man, that was a butt load of welding. Turned out great tho.
    Hey Dickhead, get out of the fast lane! Unless you're passing of course.

  9. #9
    Manic SoCalinIt's Avatar
    Date Committed
    Dec 2011
    Location
    Santa Clarita, CA
    Posts
    390
    Very nice job, guys. Looks bad ass.
    Quote Originally Posted by BCarr View Post
    Hell....I've probably handled yours more than you have

  10. #10
    Thanks guys, and thanks to Dr. Dirty for doing all the shit we couldn't! I've always liked these fenders, and I was happy to see how the install went. The owner is plenty happy as well, there was more than enough room for those 33's. There's a 2.5" lift and a 1.25" body lift on this TJ, we're going to test fit my 37's to see how much bump stop we'd have to add in the front. I think it will be pretty minimal.

    Quote Originally Posted by Obstruction of Justice View Post
    Looks freakin badass! Lookin forward to the flex pics.
    Ask and you shall receive! This was our camping trip last weekend, we only ran the Sidwinder trail both directions, had a good time. This was before the paint of course. We did all that when we got back on Sunday Afternoon.


















  11. #11
    Quote Originally Posted by dr.dirty View Post
    They turned out sweet painted and with the hood pins. I know that was alot of fun getting them off for paint LOL
    It wasn't all that bad actually! We were able to pull off the inner and outer fender as one piece. We put them back in two pieces, but it was much quicker than we expected. Everything's mounted up well and looks pretty clean inside. I'll try and get a pic of it tomorrow.

  12. #12
    Pastrami Prolapse Chris Hansen's Avatar
    Date Committed
    Nov 2011
    Location
    Southern Cal
    Posts
    2,646
    Nice!
    Get the hottest crime novel out now! http://amzn.to/Zovqkj or http://bit.ly/18N0Juv

  13. #13
    Powered By power bottoms jkristie44's Avatar
    Date Committed
    Nov 2011
    Location
    Pensacola naval base checking out the mens in uniform
    Posts
    4,546
    Quote Originally Posted by VikingGinger View Post
    Had to modify the PSC rockers to fit with new fenders


    After re-looking at this one with drunkin eyes. Gonna have to call dick move on Scott's part. I mean, he has no safety glasses and he is shooting all the debris at you. What are friends for..........:fingers:

  14. #14
    Quote Originally Posted by jkristie44 View Post
    After re-looking at this one with drunkin eyes. Gonna have to call dick move on Scott's part. I mean, he has no safety glasses and he is shooting all the debris at you. What are friends for..........:fingers:
    Hahaha, he's not shooting shit at me, that's going at my buddy Brian, not so much a dick move in this case :lol: Now, it could be considered a dick move to finish weld some pieces, stand the fender up and tell me to hold it on end for him. Not that it happened or anything, and especially not shortly after I was bragging about being the only person not getting burned from welding heat... :lol:

  15. #15
    Under Observation
    Date Committed
    Dec 2012
    Location
    Big Rock Tennessee
    Posts
    27
    Those are baddass! Excellent job

  16. #16
    Bitchin!! Did you end up finishing the hood off with door edge molding? If so, nice touch!
    :band:

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT -4. The time now is 09:34 AM.
Powered by vBulletin® Version 4.2.2
Copyright © 2018 vBulletin Solutions, Inc. All rights reserved.
Shoutbox provided by vBShout v6.2.3 (Lite) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
vBulletin Skin By: PurevB.com